Ontario Epoxy Flooring Directory
Menu

Epoxy floor repair for cracks, chips and peeling

Peeling, bubbling or cracked epoxy is a repair job, not a new installation, and it usually needs a different approach: grinding out the failed area, checking the concrete underneath for moisture problems, and re-coating so the patch blends with the surrounding floor. This page is for homeowners and shop owners dealing with an existing coating that has gone wrong, whether that's hot tire pickup in a garage, delamination from moisture, or chips from dropped tools.

  • Small chip and crack repairs where the coating is otherwise sound
  • Full strip-and-recoat when peeling covers a large area
  • Moisture testing when a floor keeps failing in the same spot
  • Color and sheen matching so the repair doesn't stand out

The providers featured here also install new epoxy systems, so they understand why floors fail and how to prevent a repeat.

What it costs

Cost depends on how much of the floor needs grinding and re-coating versus a spot patch, whether moisture testing is needed, and how closely the repair has to match existing color and flake. A small chip repair costs far less than stripping and redoing a full bay.

Top 3 by our score

Ranked from our published scoring of public Google reviews for garage floor coating.

  1. 1. Garage Floors 4 Less HQ
    4.9★ · 313 reviews
    93
  2. 2. XPS Xpress Toronto
    5.0★ · 175 reviews
    94
  3. 3. Alanis Epoxy Flooring
    5.0★ · 133 reviews
    93

Browse all providers

FAQ

Can peeling epoxy be repaired without redoing the whole floor?
Often yes, if the failure is isolated to one area and the surrounding coating is still bonded well. The damaged section gets ground out, prepped, and re-coated to match.
Why does epoxy peel in the first place?
Common causes are inadequate surface prep before the original install, moisture coming up through the slab, or coating applied over oil or sealer residue.
Will a repaired patch look different from the rest of the floor?
A skilled installer can match color, flake broadcast, and topcoat sheen closely, though slight variation is possible especially if the original coating has aged or faded.